Using I-BOND® resins on particleboard lines brings significant benefits, for example an improvement in board properties and a significant increase in production capacity, when compared to conventional resins.

Alternatively the use of 100% I-BOND® resins allow production of panels that conform to California Air Resources Board (CARB) standards CARB I and CARB II and achieve EPF-S and Japanese F**** formaldehyde emissions standards.

PB products I-BOND® PB EM 4352 has been specially developed for the particleboard industry. This resin is compatible with standard (melamine) urea formaldehyde (M)UF resins and is commonly used as a catalyst in hybrid systems, which can result in a 15% increase of production output.

I-BOND® PB PM 4350 Standard polymeric MDI resin
I-BOND® PB EM 4352 Emulsifiable MDI resin (can also be used in hybrid systems)
I-BOND® PB FC 4320 Fast cure MDI resin